Our Solution, Your Success!

Enabling SuperSpeed USB and Beyond

Products

VP302 – USB Type-C and USB PD Controller for SMPS

Description



 
The VP302 is a USB Type-C and USB PD Controller with highly integrated function for Switching Mode Power Supply (SMPS). One 8051 MCU is embedded to support PD 3.0 and Power Integrations InnoSwitch3-Pro’s I2C command protocol.

VP302 integrates 10 bit ADC for VBus monitor and supports thermal detection with external NTC for power system temperature monitor and protection. Vconn switch is built-in, and CC pins could provide the Vconn power for E-Marker Controllers. VP302 has passed USB-IF PD 3.0 and PPS certification, TID: 1000130.

Block Diagram

Key Features

  • Type-C and USB PD Support
    - Compliant to USB Type-C Cable and Connector Specification Revision 1.3
    - Compliant to USB Power Delivery Specification Revision 3.0
    - Support USB PD power profile
  • Fast 8051 Macro cell 80C32-Compatible Microcontroller
    - Standard 1T 8051 instruction set
    - Embedded OTP and SRAM
  • High Integration
    - Integrated USB Type-C baseband transceiver PHY
    - Build-in Vconn switch (sourced from Vcc)
    - Over-current protection for Vconn
    - Operating Voltage from 2.8V to 5.5V
    - Build-in 2.8~5.5V to 1.8V LDO
    - ADC for VBus voltage monitor
    - External NTC input for thermal protection
    - CC1/CC2 pins rated up to 25V
    - System level ESD 15KV Air-discharge/ 8KV contact
    - D+/D- bonding optional (to support other Proprietary Charging Protocol)
  • Master I2C Interface
    - 500KHz (typ.)
    - Support for SCL-pin interrupt
    SCL is pull down for 50us during idle time to signal fault occurs
    -Support PI supplied I2C command
  • Package
    - DFN-8 3x4m
    - Lead(Pb)-Free and RoHS compliant
  • Others
    - Ambient operating temperature: -40℃to 85℃
  • Certification
    - USB-IF TID: 1000130
  • Applications
    - USB PD Type-C Wall adapters and chargers