-
KGH．VL820 Evaluation Board
-
KGH ‧ VL811+ Evaluation Board
-
KGD．VL716 Evaluation Board
-
SuperMUTT Pack
-
VL805 Evaluation Board
-
VL671 (U3TT) Evaluation Board
-
KGS．VP302 Evaluation Board (15W)
-
KGS．VP302 Evaluation Board (18W)
-
KGS．VP302 Evaluation Board (27W, PL bit=0)
-
KGS．VP302 Evaluation Board (27W, PL bit=1)
-
Contact Us
KGH．VL820 Evaluation Board
Product Description
VIA Lab’s VL820 is the world’s first and certified USB 3.1 Gen2 Hub Controller featuring highly-integrated, application specific design. VL820 features 1x upstream port and 4x downstream ports, all of which support 10Gbps USB 3.1 Gen 2 operation. The downstream ports can support any combination of SuperSpeed Plus (10Gbps), SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps), and Low Speed (1.5Mbps) devices. VL820’s integrated USB 2.0 hub features Multiple Transaction Translators. VL820 based hubs enjoy broad cross-platform support under a variety of host controllers and SoCs, and OS support in Windows, OSX, Linux, and many others.
Package Contents:
1x VL820 Evaluation Board
1x 12V AC Adapter
1x A to MicroB Cable
Note
01/ This evaluation board is intended for use by developers and industry affiliates.
02/ VIA Labs recommends a 12V 3A power supply.03/ Future Firmware Updates provided for VL820 Evaluation Boards are intended for use with the Evaluation Board only! For other USB 3.1 hubs designs, please contact the manufacturer.
VIA Labs Firmware and Driver Downloads
NO.
File
Description
File (Size)
Download
01
VLIHubFWUpdateVersion_Gen2_0213.zip
977.16 KB
Download
Detail Product Info
Download
VL820 evaluation kit.pdf
KGH ‧ VL811+ Evaluation Board
Product Description
The VL811+ 4-port USB 3.0 hub controller is VIA Lab’s third-generation single-chip hub solution. VL811+ offers many improvements over previous generation designs with optimized low-power design, support for USB power management, and adds an integrated USB Charging Controller to the core hub logic. VL811+ is backwards compatible with USB 2.0 and USB 1.1 specifications, and fully supports SuperSpeed (5Gbps), Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) traffic. VL811+ based hubs enjoy broad cross-platform support under a variety of host controllers and SoCs, and OS support in Windows, OSX, Linux, and many others.
Note
01/ It does not ship with USB Cable.
02/ This evaluation board is intended for use by developers and industry affiliates.
03/ VIA Labs recommends 5V 4A power supply. 04/ Future Firmware Updates provided for VL811+ Evaluation Boards are intended for use with the Evaluation Board only! For other USB 3.0 hubs designs, please contact the manufacturer.
VIA Labs Firmware and Driver Downloads
NO.
File
Description
File (Size)
Download
01
VL811+ KGH Release Note.pdf
383.16 KB
Download02
VLIHubFWUpdateVersion_0982.zip
NEW Update
1.08 MB
Download
Detail Product Info
Download
VL811+ evaluation kit.pdf
KGD．VL716 Evaluation Board
Product Description
The VL716 is a single chip USB 3.1 Gen II to SATA 6Gb/s bridge controller with USB type-C connector support. Integrated in-house USB 3.1 Gen II PHY enables VL716 to run in USB SuperSpeed Gen II, Gen I, High-Speed, and Full-Speed modes. Supporting USB mass storage class Bulk-Only Transport (BOT), VL716 can work on Windows 10, Windows 8, Windows 7, Vista, XP, Mac OS X and various Linux kernels without additional driver. VL716 also support USB Attached SCSI Protocol (UASP) to enhance random read/write performance. Integrated in-house SATA 6Gb/s host controller can connect at SATA 6Gb/s, 3Gb/s, or 1.5Gb/s automatically. Built-in CC1/CC2 cable orientation detection circuits and two sets of SuperSpeed USB signal pins can support USB type-C receptacle natively to enable plug flipping feature without extra cost. 6 GPIO pins are available for push button, operation LEDs, device power down control, and other special usage. The SPI interface can support external flash for firmware upgrades or additional software enhancements.
Note
01/ This evaluation board is intended for use by developers and industry affiliates.
02/ Compliant to Universal Serial Bus 3.1 Specification Revision 1.0.
03/ Compliant to Universal Serial Bus 2.0 Specification. 04/ It does not ship with USB Cable, work under bus-power mode
05/ Firmware is Upgradable
06/ Works with Windows and iOS inbox driver, and various Linux kernels.
VIA Labs Firmware and Driver Downloads
NO.
File
Description
File (Size)
Download
01
VLISataFWUpdateVersion_95_C0_41_B0.zip
NEW Update
662.75 KB
Download
Product Description
The SuperMUTT Pack is two devices in one. It is a VIA Labs VL811+ USB 3.0 hub with a Cypress FX2 USB 2.0 device downstream. The SuperMUTT Pack is capable of simulating USB 3.0 hub behaviors such as over-current, and exposes a USB 3.0 port that can be toggled on and off. The device is capable of simulating a variety of USB 2.0 device traffic including high speed and full speed transfers to bulk, isochronous, control, interrupt endpoints. The SuperMutt Pack device is designed to work with the MUTT Software Package. The Microsoft USB Test Tool (MUTT) software package contains test tools for hardware test engineers to test interoperability of their USB controller, hub, or device with the Microsoft USB driver stack in Windows 8.
Download the Latest MUTT Software Here:
http://msdn.microsoft.com/en-us/library/windows/hardware/jj590752
Package Contents:
1x SuperMuttPack Board
1x 12V AC Adapter
1x Set of 4 Rubber Feet
1x User Guide
1x A to B Cable
Detail Product Info
Download
SuperMuttPack kit.pdf
Product Description
VLI VL805 is a single chip USB 3.0 Host controller which enables a PCI Express equipped platform to interface with USB Super-Speed (5 Gbps), High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) devices.
The VL805 USB 3.0 Controller is based on xHCI 1.0 and features 4 downstream ports and a x1 PCI Express 2.0 bus interface that is backwards compatible with PCI Express 1.0. VL805 supports USB Debugging port and is both USB-IF SuperSpeed Certified and Microsoft WHCK Compliant.
Note
01/ This evaluation board is intended for use by developers and industry affiliates
02/ Compliant to Universal Serial Bus 3.0 Specification Revision 1.0
03/ Compliant to Universal Serial Bus 2.0 Specification
04/ Compliant to eXtensible Host Controller Interface (xHCI) Specification Revision 1.0 05/ Compliant with PCI Express Base Specification 2.0.
06/ Firmware is Upgradable
07/ Initial Driver Support for Windows 7, Vista, and XP
08/ Supports for USB Attached SCSI Protocol (UASP)
09/ Supports various Linux kernels
10/ Supports Windows 10, Windows 8 inbox driver
VIA Labs Firmware and Driver Downloads
NO.
File
Description
File (Size)
Download
01
VIA USB 3.0 Driver Package Release Notes V5.60B.pdf
VIA USB 3.0 Driver Package Release Notes V5.60B
214.86 KB
Download02
VIA_XHCI_Driver_V5.60B_AP.zip
VIA_XHCI_Driver_V5.60B_AP
63.42 MB
Download
VL671 (U3TT) Evaluation Board
Product Description
VL671 is a unique High-speed USB 2.0 to Super-speed USB 3.1 Gen1 transaction translator. VL671 effectively converts USB High-speed transactions to Super-speed transactions and vice-versa. With this capability, VL671 enables USB 2.0 devices to work under a USB 3.1 downstream port which only provides Super-speed interface (no USB 2.0 capability under this USB 3.1 downstream port for specific reasons). To provide the best user experience, VL671 also provides bypass mode. When the upstream port of the VL671 is connected to a USB 2.0 downstream port, the USB 2.0 signals are bypassed from the upstream port to the downstream port directly, and vice-versa. VL671 integrates in-house Super-speed PHY and USB 2.0 PHY and employs a very powerful ARM-based 32-bit microprocessor which allows the VL671 to quickly convert transactions/protocols between USB 2.0 and USB 3.1 with minimal delay. VL671 works perfectly with single power input from USB 5V bus to save customer BOM cost and is available on QFN 48L (6x6x0.85 mm) and QFN 40L (5x5x0.85 mm) green package. VL671 QFN 48L is pin compatible to VL670.
Note
01/ This evaluation board is intended for use by developers and industry affiliates.
02/ It does not ship with USB cable, work under bus-power mode.
03/ Not all USB 2.0 devices are compatible. Compatibility issues may relate to device drivers, USB class drivers in USB 3.1, or client driver in xHCI. Not all USB device classes have been tested.
KGS．VP302 Evaluation Board (15W)
Product Description
VLI VP302 + Power Integrations InnoSwitch™3-Pro
Evaluation Board
Model 1/ 15W (PL bit=0) 5V/3A, 3.3~5.9V/3A
Model 2/ 18W (PL bit=0) 5V/3A, 9V/2A, 3.3~5.9V/3A
Model 3/ 27W (PL bit=0) 5V/3A, 9V/3A, 3.3~11V/3A
Model 4/ 27W (PL bit=1) 5V/3A, 9V/3A, 3.3V~11V/3A
VLI VP302 is an USB Power Delivery type-C controller with highly integrated function for Switching Mode Power Supply (SMPS). One 8051 MCU is embedded to support PD 3.0 and support Power Integrations InnoSwitch3-Pro’s I2C command protocol.
VP302 integrated 10 bit ADC for VBus monitor, and support thermal detect with external NTC for temperature monitor and protection. Vconn switch is built in and CC pins could provide the Vconn power for E-Marker IC.
Power Integrations InnoSwitch™3-Pro series family of ICs dramatically simplifies the development and manufacturing of fully programmable, highly efficient power supplies, particularly those in compact enclosures. The universal I²C interface enables dynamic control of output voltage and current along with many configurable features.
Power Integrations (PI) website: https://www.power.com/
Note
N/A
KGS．VP302 Evaluation Board (18W)
Product Description
VLI VP302 + Power Integrations InnoSwitch™3-Pro
Evaluation Board
Model 1/ 15W (PL bit=0) 5V/3A, 3.3~5.9V/3A
Model 2/ 18W (PL bit=0) 5V/3A, 9V/2A, 3.3~5.9V/3A
Model 3/ 27W (PL bit=0) 5V/3A, 9V/3A, 3.3~11V/3A
Model 4/ 27W (PL bit=1) 5V/3A, 9V/3A, 3.3V~11V/3A
VLI VP302 is an USB Power Delivery type-C controller with highly integrated function for Switching Mode Power Supply (SMPS). One 8051 MCU is embedded to support PD 3.0 and support Power Integrations InnoSwitch3-Pro’s I2C command protocol.
VP302 integrated 10 bit ADC for VBus monitor, and support thermal detect with external NTC for temperature monitor and protection. Vconn switch is built in and CC pins could provide the Vconn power for E-Marker IC.
Power Integrations InnoSwitch™3-Pro series family of ICs dramatically simplifies the development and manufacturing of fully programmable, highly efficient power supplies, particularly those in compact enclosures. The universal I²C interface enables dynamic control of output voltage and current along with many configurable features.
Power Integrations (PI) website: https://www.power.com/
Note
N/A
KGS．VP302 Evaluation Board (27W, PL bit=0)
Product Description
VLI VP302 + Power Integrations InnoSwitch™3-Pro
Evaluation Board
Model 1/ 15W (PL bit=0) 5V/3A, 3.3~5.9V/3A
Model 2/ 18W (PL bit=0) 5V/3A, 9V/2A, 3.3~5.9V/3A
Model 3/ 27W (PL bit=0) 5V/3A, 9V/3A, 3.3~11V/3A
Model 4/ 27W (PL bit=1) 5V/3A, 9V/3A, 3.3V~11V/3A
VLI VP302 is an USB Power Delivery type-C controller with highly integrated function for Switching Mode Power Supply (SMPS). One 8051 MCU is embedded to support PD 3.0 and support Power Integrations InnoSwitch3-Pro’s I2C command protocol.
VP302 integrated 10 bit ADC for VBus monitor, and support thermal detect with external NTC for temperature monitor and protection. Vconn switch is built in and CC pins could provide the Vconn power for E-Marker IC.
Power Integrations InnoSwitch™3-Pro series family of ICs dramatically simplifies the development and manufacturing of fully programmable, highly efficient power supplies, particularly those in compact enclosures. The universal I²C interface enables dynamic control of output voltage and current along with many configurable features.
Power Integrations (PI) website: https://www.power.com/
Note
N/A
KGS．VP302 Evaluation Board (27W, PL bit=1)
Product Description
VLI VP302 + Power Integrations InnoSwitch™3-Pro
Evaluation Board
Model 1/ 15W (PL bit=0) 5V/3A, 3.3~5.9V/3A
Model 2/ 18W (PL bit=0) 5V/3A, 9V/2A, 3.3~5.9V/3A
Model 3/ 27W (PL bit=0) 5V/3A, 9V/3A, 3.3~11V/3A
Model 4/ 27W (PL bit=1) 5V/3A, 9V/3A, 3.3V~11V/3A
VLI VP302 is an USB Power Delivery type-C controller with highly integrated function for Switching Mode Power Supply (SMPS). One 8051 MCU is embedded to support PD 3.0 and support Power Integrations InnoSwitch3-Pro’s I2C command protocol.
VP302 integrated 10 bit ADC for VBus monitor, and support thermal detect with external NTC for temperature monitor and protection. Vconn switch is built in and CC pins could provide the Vconn power for E-Marker IC.
Power Integrations InnoSwitch™3-Pro series family of ICs dramatically simplifies the development and manufacturing of fully programmable, highly efficient power supplies, particularly those in compact enclosures. The universal I²C interface enables dynamic control of output voltage and current along with many configurable features.
Power Integrations (PI) website: https://www.power.com/
Note
N/A
日本語
VIA Labs, Inc., Taipei Headquarters
